Cost Guide
How Much Does a Metal Roof Cost in Boise?
2026 metal roofing prices for Boise and the Treasure Valley by panel system — exposed-fastener, standing seam steel, aluminum, and copper/zinc — plus what actually pushes a job to the top of its range.
Metal roofing in Boise runs $700-1,200 per roofing square (100 sq ft) installed for exposed-fastener panels, $1,000-1,800 for standing seam steel, $1,100-1,700 for aluminum, and $2,000-4,000 for copper or zinc. A typical ~2,200 sq ft home (22 squares) lands around $22,000-39,600 for standing seam, the most common upgrade choice in this market.
Published 2026-08-23 · Updated 2026-08-23
What metal roofing costs in Boise, by panel system
These are installed prices for the Boise/Treasure Valley area — material and labor together, on a straightforward residential install. They are researched ranges rather than quotes, and your number will be specific to your roof’s size, pitch, and deck condition.
| Panel system | Installed cost per square (100 sq ft) | ~2,200 sq ft roof (22 squares) |
|---|---|---|
| Exposed-fastener (corrugated / R-panel / 5V-crimp) | $700 - $1,200 | $15,400 - $26,400 |
| Standing seam steel | $1,000 - $1,800 | $22,000 - $39,600 |
| Aluminum standing seam | $1,100 - $1,700 | $24,200 - $37,400 |
| Copper / zinc | $2,000 - $4,000 | $44,000 - $88,000 |
Standing seam steel is the practical standard for most Treasure Valley homes — concealed floating-clip fastening that handles this climate’s thermal swing without loosening, at a moderate premium over exposed-fastener. These figures are cross-checked against mysignatureroofing.com’s Boise-specific quotes ($12-18/sq ft standing seam, $8-12/sq ft exposed-fastener) and 2026 national data from HomeGuide and Angi.
What moves your price to the top of the range
- Tear-off and disposal — $40-100 per square, unavoidable if the deck needs inspecting, and the only way to actually see and fix what is underneath.
- Deck repair — most jobs do not need it, but where they do, damaged sheathing runs roughly $75-150 per sheet replaced.
- Pitch — steep-slope roofs (8/12 and steeper), common on Eagle’s foothills and view lots, run about 25% higher per square than standard pitch. More safety equipment, slower work.
- Panel gauge and finish — heavier gauge and premium finishes (Kynar 500/PVDF) cost more but resist oil-canning and fading better over the panel’s decades-long service life.
- Penetrations and valleys — chimneys, skylights, and multiple roof valleys each add fabrication and flashing work a simple gable roof does not need.
Why metal roofing demand is rising in this valley right now
A huge share of Treasure Valley housing stock was shingled during the 1990s-2000s building boom — the Boise metro grew more than 45% in the 1990s and roughly another third in the 2000s — and that cohort of asphalt roofs is now aging into its second or third replacement cycle. A growing share of those homeowners are switching to metal on this next reroof specifically to skip the 20-30 year replacement conversation entirely: a properly installed standing seam roof commonly runs 40-70 years. Add the Treasure Valley’s seasonal hail corridor (May-August, peaking June-July) and a genuinely wide summer-to-winter temperature swing, and metal’s denting-not- stripping hail response and floating-clip thermal engineering are real, climate-specific reasons this market is choosing it, not just a style preference.
Bottom line
Budget $1,000-1,800 per square for a standard standing seam steel installation in Boise, and expect panel system, deck condition, and pitch on your specific roof to be what moves you within that range — not the contractor you pick. A free on-site inspection is the only way to turn a range into a real number. Call (208) 279-6903 and we will walk your roof and give you a written per-square price the same visit.
The bottom line
If you want this priced for your own roof rather than in ranges, we come out and inspect at no charge across Boise and the Treasure Valley. You get a written per-square price with tear-off and any deck repair broken out separately. Call (208) 279-6903.